LST Carbon Monoxide Alarm AC 58000 300 User Manual

Carbo

onoxid

etector

AC-58000-300

• ADM loop technology with

Apollo/Discovery protocol

• Ideal supplement to common smoke

detectors

• Sensitivity selectable in 5 steps

• Optional connection of remote

indicator

• Sealed electronics

Description

The Carbon Monoxide Detector AC-58000-300 uses a ween the ﬁre detection control panel and the detector.

durable electrochemical CO sensor. It is an ideal sup- That ensures a periodical function testing of the detec-

plement to common smoke detectors because it is in- tor.

sensitive to the usual vapors and household products,

in low concentrations. The carbon monoxide detector The two LEDs with 360° visibility indicate the activated

does not respond to smoke particles and heat, and condition of the detector. The detector address is se-

therefore it shall only be used in addition to smoke or lected by means of a code card in the detector base.

heat detectors. Besides, the size of the ﬁre area shall Therefore the detector can be changed without additi-

not exceed 50m².

onal tools.

The proven ADM loop technology with Apollo/Discovery The detector can be attached to different types of ba-

protocol establishes a permanent communication bet- ses, and it can be protected against theft.

Speciﬁcations

Operating voltage

Current consumption

Ambient temperature

Relative humidity

Dimensions ø × H

Colour

Supply through loop voltage

typ. 400µA (quiescent)

0°C to +40°C (no condensation)

15 – 90% (no condensation)

100 × 42 (mm)

white

Weight

105g

Order number

Order name

243100

CO-Detector/Anal./Disc/Apo AC-58000-300

Building Safety. Building Security.

AC-58000-300_DBL_LST_EN_0804.PDF • PAGE 1