Manitowoc Ice Ice Maker K00349 User Manual

K00349 ICE DEFLECTOR KIT  
Installation Instructions  
The K00349, ice deflector kit, must be used with the S-1400, S-1600, and S-1800 ice machines, when the ice machine is  
used on a non-Manitowoc ice storage bin.  
1. Remove both front panels.  
2. Examine the ice machine to see if the machine has four screws on the lower front plastic panels (see drawing).  
3. If there are screws, remove them from the countersunk holes on the front surface of the machine. Save the screws.  
4. Install the deflector, using the four screws that were removed in step 3. In some instances, the deflector will hit the  
bin and not fit properly. Slide the ice machine back (approximately 1/2”) until the deflector fits properly.  
5. Four screws and two backing plates are in the kit.  
6. If there are no screws on the ice machine (step 2), pierce the thin plastic countersunk holes, install the backing  
plates, and install the deflector, using the screws from the kit.  
7. Replace the front panels.  
Backing plate  
to be inserted  
into side  
pocket of  
bulkhead  
Backing plate to be  
inserted into side  
Screws  
pocket of bulkhead  
Screws  
If deflector contacts  
bin, move ice  
New Ice Deflector  
machine back until  
deflector clears.  
 
8015263  
Sheet 2 of 2  
Rev. 01/16/08  
 

KTI Networks Network Card KG 502T User Manual
Kuppersbusch USA Oven EEB 96005 User Manual
Lasko Fan 1821 User Manual
Lenoxx Electronics CD Player CD 895 User Manual
LG Electronics Refrigerator LMX25988ST User Manual
Life Fitness Treadmill 90C User Manual
Linear Home Security System DXS 54 User Manual
LSI Switch SAS6160 User Manual
LumiSource Cooktop LS AURAFL XX User Manual
Mattel Motorized Toy Car Y9172 0920 User Manual